UserCamera
The UserCamera+ applet is toggled with the Control+Shift+U key combination. It can also be toggled by setting the flipCamera environment variable to a value of 1. A small window external to the ThereClient opens with the following clickable words:
Default 1stP 3rdPfnt 3rdPTop Zoom+ Zoom- FOV+ FOV- Raise Lower [RotX](../RotX/)+ [RotX](../RotX/)- Lock View Tight Loose
These controls have the following actions:
| Default | Original POV* when the UserCamera+ was activated |
| 1stP | First Person View |
| 3rdPfnt | Body Mirror View |
| 3rdPTop | Standard View |
| Zoom+ | Moves the camera closer to the avatar |
| Zoom- | Moves the camera away from the avatar |
| FOV+ | No known effect (greyed out) |
| FOV- | No known effect (greyed out) |
| Raise |
Camera revolves around the avatar in an ascending arc |
| Lower |
Camera revolves around the avatar in a descending arc |
| RotX+ | Camera revolves counter-clockwise around the avatar |
| RotX- | Camera revolves clockwise around the avatar |
| Lock |
Locks Camera in place. Avatar can move independently of the camera. Reattaches with the “Default” button. |
| View |
Overrides seating camera to allow a non- seated POV with zoom, etc. Restore seated POV by selecting View again. Do not use unless seated. It will lock the camera in place and it will not unlock without sitting down or restarting ThereClient |
| Tight | Effective only from a seated position. |
| Loose | Effective only from a seated position. |
The default view will automatically be restored if the UserCamera+ is toggled via Control-Shift-U but it must be manually restored if the camera is accessed via the flipCamera environment variable. * POV == Point Of View